Plastic Granulating Knives
Granulator Blades Application
Material| Model | Per Set | Size | Holes |
| 150 | 4 Fly | 292mm x 65mm x 14mm | 2 c/slots |
| 150 | 2 Dead | 380mm x 49mm x 14mm | 2 THB |
| GK205 | 3 FLy | 226 x 64 x 12mm | 2 c/slots |
| GK205 | 2 Dead | 250mm x 38mm x 9.50mm | 3 THB |
| GK3026K | 3 Fly | 301mm x 73mm x 14mm | 2 c/slots |
| GK3026K | 2 Dead | 325mm x 75mm x 14mm | 2 c/slots 2 edged |
| GK4535 | 3 Fly | 445mm x 97mm x 18mm | 3 c/slots |
| GK4535 | 2 Dead | 470mm x 82mm x 18mm | 3 c/slots 2 edged |
| GK6045 | 10 / 6 Fly | 295mm x 84mm x 18mm | 2 c/slots |
| GK6045 | 2 Dead | 610mm x 80mm x 18mm | 3 c/slots 2 edged |
| GK640 | 10 / 6 Fly | 296mm x 76mm x 14mm / 295 back | 3 c/slots |
| GK640 | 2 Dead | 635mm x 47mm x 14mm | 7 THB |
| GK8045 | 6 Fly | 390mm x 80mm x 20mm | 3 c/slots |
| GK8045 | 2 Dead | 802mm x 70mm x 20mm | 4 c/slots |
| GK2645 | 3 Fly | 450mm x 73mm x 14mm | 3 c/slots |
| GK2645 | 2 Dead | 468mm x 73mm x 14mm | 3 c/slots 2 edged |
| Model | Per Set | Size | Holes |
| 0 | 3 Fly | 4½” x 1.7/16" x 3/8" | 3 plain holes |
| 0 | 2 Dead | 4½” x 2.1/8" x 1/2" | 3 c/slots |
| 5/7 | 2 Fly | 5.31/32" x 2.3/4" x 1/2" | 2 c/bored holes |
| 5/7 | 2 Dead | 5" x 2" x 1/2" | 2 c/slots |
| 1/2 | 3 Fly | 7½” x 1½” x 3/8" | 4 plain holes |
| 1/2 | 2 Dead | 7½” x 2.3/4" x 5/8" | 4 c/slots |
| 7/10 | 2 Fly | 10.23" x 2.812" x 1/2" | 3 c/bored holes |
| 7/10 | 2 Dead | 10.18" x 2.06" x 1/2" | 3 c/slots, 2 o/slots |
| 2/84 | 3 Fly | 12" x 2.3/4" x 1/2" | 4 c/sunk holes |
| 7/10 | 2 Dead | 12¼” x 2.3/4" x 1/2" | 4 c/slot 2 o/slot |
| 10/12 | 3 Fly | 12.1/32" x 2.11/16" x 1/2" | 4 c/bored holes |
| 10/12 | 2 Dead | 12¼” x 2.13/64" x 1/2" | 4 c/slots |
| 4/84 - 14" | 3 Fly | 14.1/8" x 3¼ x 1/2" | 4 c/sunk holes |
| 4/84 - 14" | 2 Dead | 16¼” x 2.3/4 x 1/2" | 5 c/slot (4 edge) |
| 4/84 - 16" | 3 Fly | 15.15/16 x 3¼ x 1/2" | 4 c/sunk holes |
| 4/84 - 16" | 2 Dead | 16.3/16" x 2.3/4" x 1/2" | 5 c/slot (4 edge) |
| 6/84 | 3 Fly L/Hand | 334mm x 82mm x 13mm | 3 c/sunk holes |
| 6/84 | 3 Fly R/Hand | 334mm x 82mm x 13mm | 3 c/sunk holes |
| 6/84 | 4 Dead | 334mm x 70mm x 13mm | 4 c/slot (4 edge) |
| 30 | 6 Fly | 15.1/6" x 2.13/16" x 5/8" | 5 Holes |
| 30 | 4 Dead | 15¼” x 3.13/16" x 7/8" | 5 c/slots 2THB |
| 12/16 | 3 Fly | 16" x 3.225" x 1/2" | 4 c/sunk holes |
| 12/16 | 2 Dead | 16.235" x 2.813" x 1/2" | 5 c/slot 2 ½ slots |
| 18 | 5 Fly | 17.3/4" x 2" x 1/2" | 6 plain holes |
| 18 | 2 Dead | 18" x 3" x 5/8" | 6 c/slots 2THB |
| 37 | 4 Fly | 18½” x 2.13/16" x 3/4" | 5 plain holes |
| 37 | 4 Dead | 18.23/32" x 4.5/16" x 7/8" | 5 c/slots 2THB |
| 37B | 10 Fly | 475mm x 110mm x 20mm | 4 c/sunk holes |
| 37B | 4 Dead | 476 x 97 x 22mm | 5 c/sunk 2THB |
| 50B | 10 Fly | 19.312" x 4¼” x 3/4" | 4 c/sunk holes |
| 50B | 4 Dead | 25.3/16" x 3.3/4" x 7/8" | 6 c/slots 2THB |
| 20 | 5 Fly | 20" x 2.1/8" x 5/8" | 7 plain holes |
| 20 | 2 Dead | 20" x 3.3/8" x 7/8" | 7 c/bored slots |
| 12/20 | 3 Fly | 20" x 3¼” x 1/2" | 5 c/bored holes |
| 12/20 | 2 Dead | 20¼” x 2.13/16" x 1/2" | 7 c/slots 3 ½ slot |
| 43 | 6 Fly | 21.9/16" x 2.7/8" x 3/4" | 6 plain holes |
| 43 | 4 Dead | 21.3/4" x 3.13/16" x 7/8" | 6 c/slot 2THB |
| 15/24 | 3 Fly | 24" x 3.235" x 5/8" | 5 c/bored holes |
| 15/24 | 2 Dead | 24¼” x 3.312 x 5/8" | 7 c/slot 2THB |
| 20/50 | 10 Fly | 25" x 4.235" x 3/4" | 5 c/sunk holes |
| 20/50 | 4 Dead | 25.3/16" x 3.3/4" x 7/8" | 6 c/slots 2THB |
| 18/28 | 5 Fly | 28¼” x 4.5/16" x 3/4" | 5 c/sunk holes |
| 18/28 | 2 Dead | 28.3/8" x 3.13/16" x 17mm | 8 c/slots 3THB |
| 56T | 6 Fly | 28½ x 3.5/16" x 17mm | 6 c/sunk holes |
| 56T | 4 Dead | 28.15/16" x 2.3/4" x 5/8" | 6 c/slot 2THB |
| Model | Per Set | Size | Holes |
| Junior | 3 Fly | 4¼” x 2" x 3/8" | 2 c/bored |
| Junior | 2 Dead | 4¼” x 2" x 3/8" | 2 c/slots 2THB |
| 6/8 | 4 Fly | 7.15/16" x 2½” x 3/8" | 2 c/bored |
| 6/8 | 3 Dead | 8.3/8" x 2" x 3/8" | 2 THB |
| 18 ASHD | 6 Fly | 8½” x 2.7/8" x 1.15/32" - 1.1/8" | 2 c/bored holes |
| 18 ASHD | 2 Dead | 17.3/8" x 5" x 15/16" | 6 c/slots 2THB |
| HD45 | 6 Fly | 8¼” x 97mm x 15/16" | 2 c/slots |
| HD45 | 2 Dead | 442mm x 115mm x 24mm | 6 c/slots 2THB |
| HD40/40 | 3 Fly | 370mm x 86mm x 21mm | 3 c/bored slot 2THB |
| HD40/40 | 2 Dead | 395mm x 86mm x 21mm | 5 c/bored slot 2THB |
| 12 | 3 Fly | 11.13/16" x 3" x 3/4" | 3 c/bored holes |
| 12 | 2 Dead | 12½” x 3.1/32" x 5/8" | 3 c/slots 2THB |
| 62/52 | 6 Fly | 300mm x 100mm x 21mm | 3 c/slot |
| 62/52 | 4 Dead | 306mm x 110mm x 22mm | 4 c/slot |
| HD67 | 9 Fly | 8½” x 97mm x 15/16" | 2 c/bored slot |
| HD67 | 2 Dead | 658mm x 115mm x 24mm | 9 c/bored slot 2THB |
| 10/20 | 4 Fly | 20" x 3.1/8" x 1/2" | 3 c/bored holes |
| 10/20 | 2 Dead | 20.3/8" x 2.5/8" x 1/2" | 2THB |
| 12/24 | 4 Fly | 22.7/8" x 4.15/16" x 5/8" | 6 c/bored holes |
| 12/24 | 6/4 Dead | 24" x 3" x 5/8" | 2 THB |
| 15/26" | 5/3 Fly | 25" x 5" x 2/4" | 4 c/bored holes |
| 15/26" | 2 Dead | 25.7/8" x 4½” x 3/4" | 6 c/bored slot 2THB |
| 27 ASHD | 9 Fly | 8½ x 2.7/8" x 1.15/32" - 1.1/8" | 2 c/bored holes |
| 27 ASHD | 2 Dead | 25.15/16" x 5" x 15/16" | 9 c/slots 2THB |
| Model | Per Set | Size | Holes |
| 1200 (F) | 4 Blades | 116mm | 4 c/bored holes |
| 1000 | 6 Fly | 25mm x 115mm x 330mm | 6 c/bored |
| 800 | 2 Fly | 20mm x 105mm x 255mm | 6 holes |
| FB 6 | 3 Fly | 596mm x 78mm x 24mm | 6 c/slots |
| FB 6 | 2 Dead | 598mm x 98mm x 24mm | 10 c/slots 2THB |
| FB 4 (mini 60) | 5 Fly | 396mm x 68mm x 19mm | 5 plain holes |
| FB 4 (mini 60) | 2 Dead | 330mm x 100mm x 24mm | 6 c/slots 2THB |
| Make / Model | Per Set | Size | Holes |
| Costerelli (CJ) | 2 Blades | 390 x 125 x 10mm | 5 holes |
| Costerelli 12-50 | 2 Outer | To Shape | 4 Holes |
| Costerelli 12-50 | 2 Inner | To Shape | 5 Holes |
| Alpine 50/80 | 20 Fly | 210mm x 90mm x 20mm | 2 c/slots 2THB |
| Alpine 50/80 | 20 Dead | 210mm x 28mm x 30mm | 3 tap holes 4 edges |
| Queen Bee | 2 Blades | 300mm x 120mm x 19mm | 6 tap holes |
| Queen Bee | 2 Blades | 300mm x 120mm x 19mm | 6 c/bored slots |
| UPM- MGK - T | 2 Fly | 225mm x 64mm x 12mm | 2 c/slots |
| UPM- MGK - T | 1 Fly | 169mm x 64mm x 12mm | 2 c/slots |
| UPM- MGK - T | 2 Dead | 225mm x 61mm x 12mm | 2 c/slots |
| Dreher SG 20 | 10 Fly | 109mm x 58mm x 14mm | 3 c/bored holes |
| Dreher SG 20 | 1 Dead | 199mm x 55mm x 9mm | 3 c/bored slots |
| 26/26 | 4 Fly | 250mm x 60mm x 14mm | 4 c/bored holes |
| 26/26 | 2 Dead | 255mm x 57mm x 16mm | 4 c/slots |
| 26/41 | 4 Fly | 400mm x 57mm x 14mm | 6 c/bored holes |
| 26/41 | 2 Dead | 409mm x 57mm x 16mm | 6 c/slots |
| Silenator 912 | 2 Fly | 11½” x 2.15/16" x 9/16" | 4 c/sunk holes |
| Silenator 912 | 1 Dead | 11.13/16" x 2.7/16" x 9/16" | 4 open slots |
| 1116 | 2 Fly | 15½” x 2.15/16" x 9/16" | 6 c/sunk holes |
| 1116 | 1 Dead | 15.7/8" x 2.15/16 x 9/16" | 6 open slots |
| Conair Churchull 1420 | 3 Fly | 508mm x 74mm x 26mm | 3 c/bored holes |
| Conair Churchull 1420 | 2 Dead | 511mm x 50mm x 12mm | 8 c/slots |
| CIMP | 2 Fly | 298mm x 57mm x 18mm | 2 c/bored holes |
| CIMP | 4 Dead | 298mm x 130mm x 18mm | 3 c/slots 2 edges |
| Wortex | 4 Fly | 767mm x 75mm x 12.50mm | 7 c/sunk holes |
| Wortex | 2 Dead | 780mm x 80mm x 12.50mm | c/slot 2 T slot |
| Tria | 5 Fly | 998mm x 100mm x 22mm | 2 Edges |
| Tria | 2 Dead | 1005mm x 3.5/8" x 7/8" | 5 THB |
| Herbold 45/100 | 10 Fly | 485mm x 100mm x 22mm | 3 c/slots 4THB |
| Herbold 45/100 | 2 Dead | 994mm x 100mm x 22mm | 8 c/slots 4THB 2 edge |
| Herbold 45/100 | 2 Block | 484mm x 100mm x 28mm | 4 o/slot 3THB 2 edge |
| 45/30 | 9 Fly | 270mm x 100mm x 22mm | 3 c/slot 3THB |
| 45/30 | 2 Dead | 298mm x 80mm x 22mm | 3 c/slot 2 edge |
| 45/30 | 1 Block | 260mm x 30mm x 30mm | 2 T Hole 3 bor 2 edge |
| 30/30 | 9 Fly | 270mm x 70mm x 16mm | 2 c/slots 3THB |
| 30/30 | 2 Dead | 290mm x 76mm x 16mm | 3 slot 2 edge |
| 30/30 | 4 Block | 260mm x 30mm x 30mm | 2 T hole 3 bor 2 edge |