Knives & Saws for Wood Working
Tungsten Carbide Tipped Circular Saws (TCT Saws)
Application
Rip Saws: For ripping hard and soft woods like Beech, Pine, Belu etc., in Gang Saws.
Wudtools today is a market oriented manufacturer using the most modern manufacturing techniques to offer an interesting programme for producing precise cutting tools for Wood Working, Non-Ferrous, Ferrous and Plastics applications. It satisfies the demands of the Industries.
Illustrated here are details of Tungsten Carbide Tipped Saws that are exported world over, made to DIN German stands and produced in our most modern Computer Numerically Controlled (CNC) plant. We produce standard saws as well as special saws for new material and for special burr free cuttings. We are your best source for any application.
Standard
|
Dia |
Kerf |
No. of
Teeth |
|
200 |
2.0,2.4,2.8,3.2 |
30,42,48 |
|
250 |
2.0,2.4,2.8,3.2 |
40,48 |
|
300 |
2.4,2.8,3.2 |
36,48 |
|
350 |
2.8,3.2 |
42,54 |
Note: 1. Special Sizes on request.
2. Bore as required.
Material
AISI-A2 / AISI-D2 / HSS
Cross Cut Saws/DD Saws
Application
For sizing and trimming soft, hard, Exotic Wood, Plywood and Raw Particle Board across the grain.
Standard
|
Dia |
Kerf |
No. of
Teeth |
|
300 |
2.8,3.2 |
34,42,48 |
|
350 |
2.8,3.2 |
54,84,96,108 |
|
400 |
3.2,3.5 |
60,72,96,108,128 |
|
450 |
3.2,3.5 |
96,108,128 |
Note: 1. Special Sizes on request.
2. Bore as required.
Special Tin Kerf Saws
Application
1. For Exotic Timbers, Solid or Veneered or cutting veneers in packs with grain.
2. For Trimming Exotic Timbers, Solid or veneered across the grain as well as Plastic Sheets and Plywood used in Furniture Manufacturing. A constant feeding speed of the material is recommended.
Standard
|
Dia |
Kerf |
No. of
Teeth |
|
150 |
1.5,1.7,2.0 |
24,48 |
|
200 |
1.75,2.0 |
36,48 |
|
250 |
1.8,2.0 |
36,40,48 |
Note: 1. Bore as required.
Saw Blades for Non-Ferrous Metals and Rigid Plastics.
Application
For use on saw benches, radial arm saws and snipper saws. For sizing cuts in Aluminium Extrusion of up to 10 mm wall thickness as well as Plastic Extrusion. Also used for sizing sheet Aluminium or Plastic. For saw blades where there is a choice of number of teeth for the diameter the following rule applies. The saw with the highest number of teeth are suitable for materials upto 4 mm wall thickness. With thicker material less teeth are required.
In all cases when cutting Aluminium or Rigid Plastic profiles the operator must ensure that the work piece is firmly clamped.
Standard
|
Dia |
Kerf |
No. of
Teeth |
|
200 |
2.8,3.2 |
48,60 |
|
250 |
3.2,3.5 |
40,60,80 |
|
300 |
3.2,3.8 |
72,84,96 |
|
350 |
3.8,4.0 |
60,84,108 |
|
400 |
4.2 |
96,108,128 |
|
450 |
4.0,4.4 |
80,120 |
|
500 |
4.0 |
96,120 |
|
550 |
4.0 |
52,60,72 |
|
600 |
4.0 |
60,72 |
Sizes above 600 Dia upto 1020 mm available on request as per specification.
Note: 1. Special sizes on request, 2. Bore as required.
Veneer Peeling Knives
Veneer Clipper Knives
Veneer Slicer Knives
Pressure Bars
Planner Blades
Chipper knives
Flaker Knives
TCT Saw Blades
Band Saw Blades
Home Wood Working Industires Main Page